yuweitek is a supplier of 4G vehicle-mounted video surveillance terminals. This article introduces the 4G vehicle-mounted video surveillance terminal with device model V5. Let the editor take you to a comprehensive understanding below!
Applicable fields: taxis, buses, school buses, passenger vehicles, financial escort, special transportation and other industries
1. Vehicle monitoring function
GPS positioning monitoring function
Vehicle automatic monitoring and positioning function, GPS speed or electronic pulse speed free selection function, with information scheduling function, TTS function, external speaker can realize voice broadcast, entry and exit area setting, mileage statistics, blind spot supplementary transmission function, real-time picture upload function, track storage and playback function.
Real-time video upload monitoring function
Adopt H.264 video compression technology to realize maximum 6-channel video and 2-channel audio monitoring, real-time transmission of monitoring video through 4G wireless network, real-time upload of snapshot and alarm pictures, timing record, event record, alarm record function, image resolution D1/CIF, support HD camera 1080P.
Video storage monitoring function
Dual-card large-capacity SD and solid-state hard drives are used to store images, and special processing methods are used to process file systems to make them suitable for the safety of video and data files in the vehicle environment. Using multimedia driving record analysis software, it can realize 6-channel video and audio synchronous playback, conditional playback, clip storage, character superimposition, geographical information and driving record superposition functions, event analysis and record extraction functions, stored video conversion and export functions.
2. Vehicle alarm function
Immediately upload the alarm to the monitoring center Function:
Support emergency alarms, parking overtime alarms, speeding alarms, fatigue driving alarms, off-line alarms, area entry and exit, power failure alarms, low voltage alarms, satellite positioning module failure alarms, and satellite positioning antenna open and short circuit alarms, etc., are immediately uploaded to the monitoring center.
Voice reminder driver function:
It supports the function of overspeed alarm, overspeed warning, fatigue warning, fatigue driving alarm, departure from the route alarm, area entry and exit alarm and uploading to the monitoring center. At the same time, it can also remind the driver through alarm buzzer, voice TTS broadcast or text broadcaster.
3. Vehicle detection and control functions
Signal Detection and Control
1-way video signal output (AV display), 7-way switch signal input, 1-way vehicle speed sensor signal input, 1-way relay control output, 1-way alarm buzzer output, intelligent and forced cut-off control function.
road detection function
Road detection, road detection calculation, road detection deviation alarm, road detection overspeed alarm, entry/exit report, passing time upper/lower limit alarm, section speed limit prompt and alarm.
Automotive CAN bus function
Built-in automotive CAN bus or equipped with an automotive bus controller to realize vehicle condition data reading, safety monitoring, fault code uploading and clearing.
External devices through the transparent port, support for re-development functions
It can be connected to external devices such as taxi meter, bus card reader, RFID card reader, LCD information screen, printer, LED display, fuel quantity collection equipment, temperature collection equipment, and forward and reverse collection equipment.
4. Car driving recorder function
The car dash cam and mobile dvr function supports information collection and storage, driver identification, parameter setting, data export, data and information printing, and the recorder data can be retrieved remotely through the platform or extracted through the local serial port.
5. Protection function
power saving mode
After the vehicle is turned off, the terminal working current is reduced to 70mA@24V. When the battery voltage is too low, the video will be saved automatically, and then shut down, the video will not be lost.
overvoltage protection
If the limit voltage (36V) is exceeded, the external circuit protection terminal will be cut off immediately, and after the video is automatically saved, the power of the whole machine will be turned off, and the video will not be lost.
look more:
https://www.linkedin.com/company/fleet-management-systems/ https://www.linkedin.com/company/dash-cam-for-car/ https://www.linkedin.com/company/us-fleet-tracking/ https://www.linkedin.com/company/dash-cams-for-truckers/ https://www.linkedin.com/company/dash-cam-with-gps/ https://www.linkedin.com/company/cardvrcarblackbox/ https://www.linkedin.com/company/fullhdcardvr1080p/ https://www.linkedin.com/company/bodycammanufacturers/ https://www.linkedin.com/company/dash-cams-for-truckers/ https://www.linkedin.com/company/best-dash-cam-2023/ https://www.linkedin.com/company/gps-vehicle-tracking-and-fleet-management/https://www.facebook.com/people/Dash-Cam-for-Car/100094661222592/
https://www.facebook.com/people/Yuweitekcom/100094042050086/
评论
发表评论